STORAGE > NAS > MAIN UNIT 
Click to zoom
Qnap TS-453BT3-8G 4-Bay NAS Storage ( Intel Celeron J3455 quad-core 1.5 GHz, burst up to 2.3 GHz, 8GB RAM, 1 x 10GbE & 2 x GbE,2 x Thunderbolt 3, 5 x USB 3.2 Gen1) |
| 5,499.00 MYR |
Out of Stock Order: Add to cart |
| Category : NAS Group : MAIN UNIT Code : TS-453BT3-8G UM : UNIT Brand : QNAP |
Qnap TS-453BT3-8G 4-Bay NAS Storage ( Intel Celeron J3455 quad-core 1.5 GHz, burst up to 2.3 GHz, 8GB RAM, 1 x 10GbE & 2 x GbE,2 x Thunderbolt 3, 5 x USB 3.2 Gen1)
TS-453BT3-8G
| CPU | Intel® Celeron® J3455 4-core/4-thread processor, burst up to 2.3 GHz |
| CPU Architecture | 64-bit x86 |
| Graphic Processors | Intel® HD Graphics 500 |
| Floating Point Unit |
|
| Encryption Engine | (AES-NI) |
| Hardware-accelerated Transcoding |
|
| System Memory | 8 GB SODIMM DDR3L (2 x 4 GB) |
| Maximum Memory | 8 GB (2 x 4 GB) |
| Memory Slot |
2 x SODIMM DDR3L
For dual-DIMM configuration, you must use a pair of identical DDR3L modules.
|
| Flash Memory | 4GB (Dual boot OS protection) |
| Drive Bay |
4 x 3.5-inch SATA 6Gb/s, 3Gb/s
The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/ |
| Drive Compatibility |
3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
| Hot-swappable |
The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.
|
| M.2 Slot |
2 x M.2 2280 SATA 6Gb/s SSD slots (pre-installed QM2 PCIe card)
The M.2 SSD is not included as standard.
|
| SSD Cache Acceleration Support |
|
| Gigabit Ethernet Port (RJ45) | 2 |
| 10 Gigabit Ethernet Port |
1 x 10GBASE-T (10G/5G/2.5G/1G/100M)
Pre-installed QM2 PCIe card
|
| Wake on LAN (WOL) |
|
| Jumbo Frame |
|
| Thunderbolt Port | 2 (Thunderbolt™ 3) |
| PCIe Slot |
1 x PCIe Gen 2 (x2), pre-installed with a QM2 expansion card (QM2-2S10G1TB) that includes a 10GbE 10GBASE-T port and two M.2 SATA SSD slots.
The M.2 SATA SSD slots on this QM2 card only support M.2 2280 SATA 6Gb/s SSD, please check the compatibilities before purchase.
PCIe bandwidth limitations will restrict the NAS 10GbE performance. |
| USB 3.2 Gen 1 port | 5 |
| USB 3.2 Gen 2 (10Gbps) Port | Optional via a PCIe adapter (need to replace the pre-installed QM2 card) |
| IR Sensor | (RM-IR004, RM-IR002, & MCE) |
| HDMI™ Output | 2, HDMI™ 1.4b (up to 3840 x 2160 @ 30Hz) |
| Audio Input | - (No longer available on units manufactured on or after 2021/1/1) |
| Audio Output | - (The line out jack and speaker are no longer available on units manufactured on or after 2021/1/1) |
| Form Factor | Tower |
| LED Indicators | Power/Status, LAN, USB, HDD1-4 |
| LCD Display/ Button | Monochrome OLED display with capacitive sensing Enter and Select buttons |
| Buttons | Power, USB copy, Reset, Capacitive touch buttons (select, enter) |
| Dimensions (HxWxD) | 168 × 170 × 226 mm |
| Weight (Net) | 2.51 kg |
| Weight (Gross) | 4.05 kg |
| Operating Temperature | 0 ~ 40˚C (32˚F ~ 104˚F) |
| Storage Temperature | -20 - 70°C (-4°F - 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 120W adapter (12VDC), 100-240VAC |
| Power Consumption: Operating Mode, Typical | 38.101 W |
| Fan | System: 1 x 120mm |
| System Warning | Buzzer |
| Kensington Security Slot |
|
| Standard Warranty | 2 |
| Max. Number of Concurrent Connections (CIFS) - with Max. Memory | 1500 |
Reviews for this item
There are no reviews for this item.
Be the first to add a review for this item